Skip to main content

Full text of "Circuits"

See other formats

LED LilyPad Frame 

Make] Projects 

LED LilyPad Frame 

Written By: Mmc 



Double- sided tape (1) 

• LilyPad LED liohts (4) 

Hot glue gun (1) 

2N2222NPN transistor (1) 

Soldering iron (1) 

1/4W 5% 100K resistor (1) 

Resistors. 1kQ (1) 

PIR proximity sensor (1) 

small pc board (1) 

Cardboard (1) 

black and white wire (1) 

Photocell (1) 

9Vcharqer (1) 

Picture frame (1) 


You may have the most beautiful picture, diploma, or award that's hiding in the dark. Now 
you can illuminate it with the LED LilyPad Frame, and bring it to life. 

Here are the materials you will need to build this beautiful project: 

) Make Projects 

Page 1 of 4 

LED LilyPad Frame 

Step 1 — Cutting time! 

• Take the padded cardboard and cut out two squares .75 inches by .75 inches. (It has to be 
.30 inch thick.) Then cut each of the squares across the diagonal to make triangles. 

• You will need four of these triangles. 

Step 2 — Next :) 

• Solder a white or red wire to the 
positive side of a LilyPad and the 
black wire to the negative side. 

• Do this for all four of the LilyPads. 

) Make Projects 

Page 2 of 4 

LED LilyPad Frame 

Step 3 — Gluing 

• Glue the the LilyPad to the hypotenuse of one of the triangles. 

• Then take a piece of the double-sided tape and apply it to one side, 

• Repeat for all four corners. 

Step 4 — Circuit 

• This is the circuit that makes everything work. 

• Make sure you have a breadboard to test out everything before you solder it together. 

) Make Projects 

Page 3 of 4 

LED LilyPad Frame 

Step 5 — Final assembly 

• After you are done with all the connections, then glue a triangle into each corner of the 

• Enjoyyyyyyyyyyyyy :) 

st generated on 2012-10-31 10:40:32 AM. 

) Make Projects 

Page 4 of 4